Alarm Horn: Service and Repair

Theft Deterrent Alarm Replacement

Removal Procedure

1. Open the Hood.




2. Disconnect the electrical connectors (3) from the theft deterrent horn assembly.
3. Remove the theft deterrent horn assembly to vehicle body retaining bolt (1).
4. Pull the theft deterrent horn assembly (2) upward in order to remove it from the vehicle.

Installation Procedure




1. Align the theft deterrent horn assembly in original position. Be sure to align locating tang (2) in the correct position.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the theft deterrent horn to vehicle body retaining bolt (1) and tighten to 8 Nm (6 lb ft).
3. Connect the electrical connectors (3) to the theft deterrent horn assembly.
4. Close the hood.