Wheelhouse Splash Shield Replacement (Left Side)

Wheelhouse Splash Shield Replacement (Left Side)

Removal Procedure

Danger: To avoid any vehicle damage, serious personal injury or death when major components are removed from the vehicle and the vehicle is supported by a hoist, support the vehicle with jack stands at the opposite end from which the components are being removed and strap the vehicle to the hoist.


Warning: Refer to Safety Glasses Warning (Safety Glasses Warning).

Warning: Refer to Brake Dust Warning (Brake Dust Warning).

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Remove the left front wheel. Refer to Tire and Wheel Removal and Installation (Service and Repair).





Note: Depress the splash guard clips (1) to disengage the splash guard (2) from the wheel house (3).

3. Remove the splash guard (2) from the wheel house (3).

Installation Procedure





Note: Make sure the splash guard clips (1) are correctly engaged with the wheel house (3) to prevent an induced rattle condition.

1. Install the splash guard (2) to the wheel house (3).
2. Install the left front wheel. Refer to Tire and Wheel Removal and Installation (Service and Repair).
3. Lower the vehicle to the ground.