Front Seat Cushion Replacement

Front Seat Cushion Replacement

Removal Procedure




Warning: Refer to Battery Disconnect Warning (Battery Disconnect Warning).

Warning: Refer to SIR Warning (SIR Warning).

1. Disconnect the battery ground cable from the battery. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair).
2. Disable the SIR system. Refer to SIR Disabling and Enabling (Service and Repair).
3. Remove the front seat. Refer to Front Seat Replacement - Bucket (Front Seat Replacement - Bucket).
4. Remove the front seat adjuster. Refer to Front Seat Adjuster Replacement (Front Seat Adjuster Replacement).
5. Remove seat-back frame assembly. Refer to Driver or Passenger Seat Back Cushion Frame Replacement (Driver or Passenger Seat Back Cushion Frame Replacement).
6. Disengage the front and side J-strips (2) from the seat cushion base (3).
7. Remove the front seat cushion (1).

Installation Procedure




Warning: Refer to SIR Warning (SIR Warning).

1. Install the front seat cushion (1) onto the seat cushion base (3).
2. Engage the front and side J-strips (2) onto the seat cushion base (3).
3. Install seat-back frame assembly. Refer to Driver or Passenger Seat Back Cushion Frame Replacement (Driver or Passenger Seat Back Cushion Frame Replacement).
4. Install the front seat. Refer to Front Seat Replacement - Bucket (Front Seat Replacement - Bucket).
5. Enable the SIR system. Refer to SIR Disabling and Enabling (Service and Repair).
6. Connect the battery ground cable to the battery. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair).
7. Re-zero the inflatable restraint passenger presence system. Refer to Passenger Presence System Programming and Setup (Programming and Relearning).
8. Test the seat for correct mechanical and electrical operation.