Oil Pan Cover Replacement

Oil Pan Cover Replacement

Removal Procedure




1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Remove the oil pan cover to oil pan retaining bolts (2).
3. Remove the cover (1).
4. Remove the gasket (3).

Installation Procedure




1. Position the gasket (3) and cover (1) on the engine block.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the retaining bolts (2) for the cover and tighten to 12 Nm (106 lb in).
3. Lower the vehicle.