Manual Shift Shaft Pin, Detent Lever, and Park Pawl Actuator Assembly Removal

Manual Shift Shaft Pin, Detent Lever, and Park Pawl Actuator Assembly Removal




1. Remove the bolts (1, 2), manual shaft detent spring and plate.




2. Remove the bolts (1, 2) and parking lock pawl bracket.




3. Using needle-nose pliers, remove the retainer spring.




4. Using a chisel and hammer, unstake and remove the manual shaft detent lever spacer.




5. Using a pin punch and hammer, tap out the pin.
Slowly tap out the pin so that it will not fall into the transmission.




6. Remove the manual valve lever shaft, manual valve lever, and spacer.




7. Remove the parking lock rod from the manual valve lever.