38. Crankshaft Rear Oil Seal Installation

Crankshaft Rear Oil Seal Installation

Special Tools
* J-8614-A - Pinion Flange Holder and Remover
* J-22928-B - Seal Installer





Note: Keep the lip free from foreign matter.

1. Apply MP grease to the lip of a new oil seal.

Note:
* Wipe any extra grease off the crankshaft.
* Do not tap the oil seal at an angle.

2. Using the J-22928-B - installer (1) and a hammer, tap in the oil seal until its surface is flush with the rear oil seal retainer edge.