Removal and Replacement

Front Bumper:

REMOVAL

Disconnect the ground cable from battery.
Remove the six clips on the upper part of bumper.







Turn over the mud guard, and then remove the clips (A) and screw (B), which clip the front bumper to fender.







Remove the two clips (A), turn over the mud guard, and then remove the clip (B). (Conduct the same procedure on the right side.)







Remove the clip in the center part of bumper.







Remove the fog light connector.
Remove the bumper from body.
Remove the energy absorber foam from front bumper beam.







Loosen the bolt and nut, and then remove the bumper beam from body.







INSTALLATION

Install in the reverse order of removal.
Secure the bumper mounting hole (A) to slider (B).