Rear Suspension

Rear Trailing Link
REMOVAL
Loosen the rear wheel nuts.
Lift-up the vehicle, and then remove the rear wheels.
Remove both the rear parking brake clamp and ABS wheel speed sensor harness.
Remove the bolt which secures the trailing link to trailing link bracket.




(1) Trailing link

Remove the bolt which secures the trailing link to rear housing.

INSTALLATION
Install in the reverse order of removal.
Always tighten the bushing location when tires are in full contact with the ground and the vehicle is at curb weight condition.

Note: Check the wheel alignment and adjust if necessary.

DISASSEMBLY
FRONT BUSHING
Using the ST, press the front bushing out of place.
ST 32005221 INSTALLER & REMOVER SET




(1) Press
(2) Trailing link