Mode Actuator Replacement

Mode Actuator Replacement

Removal Procedure

1. Remove the left side sound insulator screws.
2. Remove the left hand floor duct. Refer to Floor Air Outlet Duct Replacement - Left Side (with JF4) (Floor Air Outlet Duct Replacement - Left Side (with JF4))Floor Air Outlet Duct Replacement - Left Side (without JF4) (Floor Air Outlet Duct Replacement - Left Side (without JF4)).




3. Disconnect the electrical connector from the mode actuator.
4. Remove the screws from the mode actuator (1).
5. Remove the mode actuator.

Installation Procedure





Important: The new actuator is in Bi-Level mode. Place the door in the middle of the travel position before you install the actuator.


1. Install the mode actuator (1).

Notice: Refer to Fastener Notice (Fastener Notice).

2. Install the screws to the mode actuator (1).

Tighten the screws to 1.9 Nm (18 in. lbs.).

3. Install the left hand floor duct. Refer to Floor Air Outlet Duct Replacement - Left Side (with JF4) (Floor Air Outlet Duct Replacement - Left Side (with JF4))Floor Air Outlet Duct Replacement - Left Side (without JF4) (Floor Air Outlet Duct Replacement - Left Side (without JF4)).
4. Install the left side sound insulator screws.
5. Recalibrate the mode actuator. Refer to Actuator Recalibration (Testing and Inspection)