Front Suspension

Stabilizer Shaft Insulator Replacement

Removal Procedure




1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Remove the stabilizer shaft insulator clamp mounting bolts.
3. Remove the stabilizer shaft insulator clamp from the stabilizer shaft insulator.
4. Lower the stabilizer shaft and remove the stabilizer shaft insulator.

Installation Procedure




1. Install the stabilizer shaft insulator to stabilizer shaft with slit facing the front of the vehicle.
2. Install the stabilizer shaft insulator clamp to the stabilizer shaft insulator.

Notice: Refer to Fastener Notice (Fastener Notice).

3. Install the stabilizer shaft insulator clamp mounting bolts.

Tighten the stabilizer shaft insulator clamp mounting bolts to 54 Nm (40 ft. lbs.).

4. Lower the vehicle.