Luggage Carrier Rivet Nut Replacement

Luggage Carrier Rivet Nut Replacement

Removal Procedure

1. Remove the luggage carrier. Refer to Luggage Carrier Replacement (Luggage Carrier Replacement).




Caution: Refer to Safety Glasses Caution.
2. Drill through the luggage carrier rivnut head using a 7.5 mm (0.295 in) drill bit.
3. Remove the rivnut from the roof.

Installation Procedure

1. Using a 10 mm (0.3937 in) drill bit, drill the rivnut hex shape hole in the roof out to a round 10 mm hole.




2. Install a replacement rivnut to the hole in roof using a rivnut tool, or equivalent.
3. Install the luggage carrier. Refer to Luggage Carrier Replacement (Luggage Carrier Replacement).