Air Temperature Actuator Replacement - Left Side

Air Temperature Actuator Replacement - Left Side

Removal Procedure

1. Remove the instrument panel (I/P) carrier. Refer to Instrument Panel Carrier Replacement (Instrument Panel Carrier Replacement).




2. Remove the air temperature actuator - left (1) retaining screws.
3. Disconnect the air temperature actuator - left electrical connector.
4. Remove the air temperature actuator - left.

Installation Procedure




1. Install the air temperature actuator - left (1).

Notice: Refer to Fastener Notice (Fastener Notice).

2. Install the air temperature actuator - left retaining screws.

Tighten the screws to 1.9 Nm (17 in. lbs.).

3. Connect the air temperature actuator - left electrical connector.
4. Install the I/P carrier. Refer to Instrument Panel Carrier Replacement (Instrument Panel Carrier Replacement).
5. Recalibrate the air temperature actuator on vehicles equipped with automatic climate control (C68). Refer to Actuator Recalibration (Testing and Inspection).