Lower Anchor Assembly Replacement - Rear No. 1

Lower Anchor Assembly Replacement - Rear No. 1

Removal Procedure

1. Remove the seat from the vehicle.
2. Remove the trim panel from the seat cushion.




3. Remove the bolt (2) securing the lower anchor (1) to the seat cushion frame.
4. Remove the lower anchor.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the rear seat lower anchor to the seat cushion frame with the bolt (2) and tighten to 35 Nm (26 ft. lbs.).
2. Install the trim panel to the seat cushion.
3. Install the seat in the vehicle.