Amplifier: Service and Repair

Radio Speaker Amplifier Replacement

Removal Procedure

1. Remove the upper right quarter trim panel. Refer to Quarter Upper Trim Panel Replacement (Quarter Upper Trim Panel Replacement).
2. Remove the lower right quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side (Rear Quarter Trim Panel Replacement - Right Side).




3. Disconnect the electrical connectors from the radio speaker amplifier.
4. Remove the 4 bolts that retain the radio speaker amplifier to the body.
5. Remove the radio speaker amplifier from the body.

Installation Procedure




1. Install the radio speaker amplifier to the body.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the 4 bolts that retain the radio speaker amplifier to the body and tighten to 10 Nm (88 in. lbs.).
3. Connect the electrical connectors to the radio speaker amplifier.
4. Install the lower right quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side (Rear Quarter Trim Panel Replacement - Right Side).
5. Install the upper right quarter trim panel. Refer to Quarter Upper Trim Panel Replacement (Quarter Upper Trim Panel Replacement).
6. Refer to Control Module References (Programming and Relearning) for programming and setup information.