Wheel Cylinder: Service and Repair

REMOVAL





1. Disconnect brake hose at wheel cylinder.
2. Disassemble rear drum brake assembly.
3. Remove bleeder valve and cap.
4. Remove wheel cylinder retaining fasteners and remove cylinder.

INSTALLATION





1. Install new wheel cylinder onto backing plate with fasteners.
Torque: 10 Nm (89 inch lbs.)
2. Connect brake hose with new washers onto wheel cylinder.
Torque: 49 Nm (36 ft. lbs.)
3. Install bleeder valve and cap.
Torque: 7.5 Nm (66 inch lbs.)
4. Completely assemble rear drum brake assembly.
5. Bleed brakes.