Slide Bar-Coupe

REMOVAL






1. Remove seat belt slide bar attachment fasteners and remove slide bar.

INSTALLATION

CAUTION: USE LOCTITE(R) 242 THREADLOCKER OR EQUIVALENT ON ALL RESTRAINT FASTENERS WHEN INSTALLING THEM.






IMPORTANT: Make certain the cut and stitched side of the belt loop is facing outboard and the belt is straight as pictured.

1. Grasp seat belt at unattached end.
2. Rotate belt loop inboard to the center of vehicle 180 degrees rearward. Place loop over slide bar as shown.
3. Install slide bar and fasteners.

Torque: 50 N.m (37 ft-lbs)