Rear Washer Hose Routing

REAR WASHER HOSE ROUTING




The rear washer hose is a component of the rear end wiring harness assembly. It is routed behind the right rear quarter trim, then across the rear window lower panel and up the left side rear corner of the vehicle. The harness assembly then routes across the top of the vehicle to the center high mounted stop lamp (CHMSL) area. If a new hose is required, use standard flexible washer hose of the correct diameter. Route along harness, taping the hose to the harness where the original hose is secured. Continue routing the hose to the washer nozzle. Check function of nozzle after installation.

REAR WASHER NOZZLE ADJUSTMENT




There is no washer nozzle adjustment for the wagon lift gate. If the rear washer nozzle does not spray within the spray target area, replace the rear washer nozzle assembly.