Rear Bumper Reinforcement: Service and Repair

Rear Bumper Impact Bar Replacement


Removal Procedure

1.Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement Rear Bumper Fascia Replacement .





2.Remove the impact bar (1).

-Remove the 8 nuts (2 and 4).

-Remove the 2 lock nuts (3).

Installation Procedure

Notice:Refer to Fastener Notice .

Important:Use NEW nuts.

1.Install the rear impact bar.

TightenTighten the 8 nuts to 20 N �m (15 lb ft).

2.Install the rear bumper fascia. Refer to Rear Bumper Fascia Replacement Rear Bumper Fascia Replacement .