Automatic Transmission Flex Plate Replacement

Automatic Transmission Flex Plate Replacement

Special Tools

L0009466 Flywheel Holding Tool


Removal Procedure





1. Remove the automatic transmission.
2. Detach the drive disc.

* Lock the drive disc via starter ring gear with L0009466 (1).
* Remove the 6 bolts.




Installation Procedure


Notice: Refer to Fastener Notice (Fastener Notice) .

1. Attach the drive disc.

* Clean thread in crankshaft.
* Use new bolts.

Tighten the 6 bolts to 60 N.m (44 lb ft).

* Remove L0009466 .

2. Install the automatic transmission.