Rear Window Washer Nozzle Replacement (Sedan)

Rear Window Washer Nozzle Replacement (Sedan)

Removal Procedure

1. Remove the liftgate upper trim panel.




2. Remove the high mounted stop lamp.
Release the 6 clips (1).
3. Remove the high mounted stop lamp.

* Disconnect the wiring harness plug (2) and remove.
* Remove the hose (3) from the washer/wiper system.





4. Remove the washer nozzle (1).



Installation Procedure

1. Install the washer nozzle.
2. Install the high mounted stop lamp.

* Connect the hose for the washer/wiper system.
* Connect the wiring harness plug.
* Install the 6 clips.

3. Install the liftgate upper trim panel.