Brake Pressure Modulator Valve Bracket Replacement

Brake Pressure Modulator Valve Bracket Replacement

Removal Procedure




1. Turn the ignition switch to the OFF position.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
3. Remove the left front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (Service and Repair).
4. Remove the brake pressure modulator valve (BPMV) bracket nuts (1).




5. Carefully position aside the BPMV and bracket assembly to access the BPMV bolt.
Support the BPMV assembly with heavy mechanics wire or equivalent.
6. Remove the BPMV bolt (1).




7. Remove the bracket (1) from the BPMV.

Installation Procedure




1. Install the bracket (1) to the BPMV.

Caution: Refer to Fastener Caution (Fastener Caution).




2. Install the BPMV bolt (1) and tighten to 10 Nm (89 lb in).




3. Carefully position the BPMV and bracket assembly to the wheel house.
4. Install the BPMV bracket nuts (1) and tighten the bolts to 10 Nm (89 lb in).
5. Install the left front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (Service and Repair).