Engine Mount Bracket Replacement

Engine Mount Bracket Replacement

Removal Procedure




1. Remove the engine mount. Refer to Engine Mount Replacement (Service and Repair).
2. Remove the engine mount bracket to engine bolts (1).
3. Remove the engine mount bracket (2).

Installation Procedure




1. Position the engine mount bracket (2) to the engine.
2. Install the engine mount bracket bolts (1) in the following locations:

* The long bolts through the engine mount bracket to the engine block
* The short bolt through the engine lift bracket to the engine mount bracket

Caution: Refer to Fastener Caution (Fastener Caution).

3. Tighten the engine mount bracket bolts in the following sequence:

1. Tighten the engine mount bracket to engine block bolts to 90 Nm (66 lb ft).
2. Tighten the engine lift bracket to engine mount bracket bolts to 33 Nm (24 lb ft).

4. Install the engine mount. Refer to Engine Mount Replacement (Service and Repair).