Trunk / Liftgate Shock / Support: Service and Repair

BACK DOOR SUPPORT

REMOVAL

HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. REMOVE BACK DOOR STAY ASSEMBLY LH





(a) Using a screwdriver, remove the 2 stop rings and stay.

HINT: Remove the door stay while supporting the back door with your free hand.

INSTALLATION

HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. INSTALL BACK DOOR STAY ASSEMBLY LH





(a) Install the stay with the 2 stop rings.

DISPOSAL

HINT: Use the same procedures for the LH side and RH side.

1. DISPOSE OF BACK DOOR STAY ASSEMBLY LH
(a) Horizontally fix the stay in a vise with the piston rod pulled out.





(b) Using a metal saw, gradually cut any area between A and B to release the gas.





CAUTION: As metal debris may be blown outward by the gas, you must:
- Wear protective glasses.
- Cover the area being cut.

NOTICE: The gas is colorless, odorless and harmless.