Removal

2AZ-FE EMISSION CONTROL: PURGE VALVE: REMOVAL

2AZ-FE EMISSION CONTROL: PURGE VALVE: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE NO. 1 VACUUM SWITCHING VALVE ASSEMBLY





(a) Disconnect the connector.
(b) Remove the wire harness clamp.
(c) Disconnect the 2 purge line hoses from the No. 1 vacuum switching valve assembly.
(d) Remove the No. 1 vacuum switching valve assembly from the air cleaner hose.