Installation

U760E AUTOMATIC TRANSMISSION / TRANSAXLE: TRANSMISSION WIRE: INSTALLATION

1. INSTALL TRANSMISSION WIRE

(a) Coat the O-ring with ATF.





(b) Install the transmission wire and lock plate to the transmission valve body assembly with the bolt.

Torque : 11 Nm (110 kgf-cm, 8 ft-lbf)

(c) Install the transmission wire to the clamp.

(d) Install the transmission wire and lock plate to the transmission valve body assembly with the bolt.

Torque : 11 Nm (110 kgf-cm, 8 ft-lbf)

(e) Connect the 8 connectors.

2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY Installation

3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY Part 1

4. INSTALL TRANSMISSION OIL CLEANER MAGNET Part 1

5. INSTALL AUTOMATIC TRANSAXLE OIL PAN GASKET Part 1

6. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY Part 1

7. ADJUST AUTOMATIC TRANSAXLE FLUID

Procedures

8. INSTALL NO. 1 ENGINE UNDER COVER Installation