Rear Door Latch: Service and Repair

Rear Door Latch and Door Lock Actuator Assembly

REMOVAL
1. Raise the door glass to the top position.
2. Disconnect the ground cable from the battery.
3. Remove the rear door trim.
4. Remove the cable from rear inner remote.
5. Remove the sealing cover.
6. Remove the rear sash.
7. Remove the three screws and one bolt.






8. Disconnect the connectors, and then remove the rear door latch and door lock actuator assembly.

INSTALLATION
Install in the reverse order of removal.

NOTE:
Check the following items during the installation:
- Is the rod deformed?
- Does the cable have deformation such as snag?