Front Suspension

Front Stabilizer

REMOVAL
1. Lift-up the vehicle, and then remove the front wheels.
2. Remove the front under cover.
3. Remove the front crossmember support plate.
4. Remove the stabilizer link.





5. Remove the stabilizer link.





INSTALLATION
Install in the reverse order of removal.

NOTE:
^ Use a new flange nut (with WAX).
^ Install so that the paint mark on the stabilizer is on the left side of the vehicle.
^ Install the stabilizer bushing (front crossmember side) while aligning it with the paint mark on stabilizer.

Tightening torque:
Stabilizer link: 60 Nm (6.1 kgf-m, 44.3 ft. lbs.)
Stabilizer clamp 25 Nm (2.5 kgf-m, 18.1 ft. lbs.)

INSPECTION
1. Check the bushing for cracks, fatigue or damage.
2. Check the stabilizer link for damage.