PCV Valve Hose: Service and Repair

PCV Hose Assembly

REMOVAL

CAUTION: Do not remove unless the PCV hose, diagnostics connector and PCV valve are damaged.

1. Remove the collector cover.
2. Remove the intake manifold.
3. Remove the secondary air combination valve RH.
4. Fit the depression in the ST with the protrusion on the clamp to unlock.
5. Remove the PCV hose assembly.

ST 18353AA000 CLAMP PLIER






INSTALLATION

1. Install the PCV hose assembly, then lock by fitting the ST on the clamp protrusion.

NOTE: Use a new clamp.

ST 18353AA000 CLAMP PLIER






2. Install the secondary air combination valve RH.
3. Install the intake manifold.
4. Install the collector cover.