Installation

INSTALLATION

1) Install the strut mount at the upper side of strut to body, and tighten it with new self-locking nuts.

Tightening torque:
20 N-m (2.0 kgf-m, 14.5 ft-lb)

2) Align alignment marks on the camber adjusting bolt and strut.
Using new self locking nuts, install the strut to the housing.

NOTE:
While holding the head of adjusting bolt, tighten the self-locking nut.

Tightening torque:
155 N-m (15.8 kgf-m, 114.3 ft-lb)

3) Secure the ABS wheel speed sensor harness to the strut.
4) Install the bolts which secure the brake hose to the strut.

Tightening torque:
33 N-m (3.4 kgf-m, 24.3 ft-lb)

5) Install the front wheels.
6) Inspect the wheel alignment and adjust if necessary.