Removal

Transmission Mounting System

REMOVAL

PITCHING STOPPER

1) Disconnect the ground cable from battery.
2) Remove the air intake chamber and intake boot.
3) Remove the pitching stopper.





TRANSMISSION REAR CROSSMEMBER & REAR CUSHION RUBBER

1) Disconnect the ground cable from battery.
2) Lift up the vehicle.
3) Remove the front exhaust pipe, rear exhaust pipe and muffler.
4) Remove the heat shield cover.





5) Set the transmission jack under transmission. Make sure that the support plate of transmission jack does not touch the oil pan.
6) Remove the transmission rear crossmember.





7) Remove the rear cushion rubber from transmission.