VDC Sequence Control

VDC Sequence Control

OPERATION
1) While the VDC sequence control is performed, the operation of the hydraulic unit can be checked using the brake tester or pressure gauge after the hydraulic unit solenoid valve is operated.
2) VDC sequence control can be started by Subaru Select Monitor.

VDC SEQUENCE CONTROL WITH SUBARU SELECT MONITOR

NOTE:
In the event of any trouble, sequence control will not operate.

1) Connect the Subaru Select Monitor.
2) Operate according to the procedures displayed in the Subaru Select Monitor.
3) Operation points will be displayed on Subaru Select Monitor.

CONDITIONS FOR VDC SEQUENCE CONTROL





NOTE:
The control operation starts from point A.