Removal

Oil Pump

REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the V-belts.
3) Disconnect the connector from power steering pump switch.
4) Disconnect the pressure hose and suction hose from the oil pump.

CAUTION:
^ Do not allow fluid to come into contact with the pulley belt.
^ Plug the ends of the hose and pipe to prevent foreign matter from entering.





5) Remove the installation bolt of the power steering pump bracket.








6) Secure the oil pump bracket on a vise and remove the bolts from front and back of the oil pump.

CAUTION:
When securing the oil pump bracket in a vice, hold the oil pump bracket with the least possible force between two pieces of wood.








7) Remove the oil pump from the bracket.