Inspection

ATF Cooler Pipe and Hose

INSPECTION
Repair or replace any faulty ATF cooler hoses, ATF cooler pipes, clamps, and washers found in the inspection below.
1) Check for ATF leaks in joints between the transmission, radiator, ATF cooler pipes, and ATF cooler hoses.
2) Check the clamp for deformation.
3) Lightly bend the ATF cooler hose and check for cracks in the surface or other damages.
4) Pinch the ATF cooler hose with your fingers and check for poor elasticity.
5) Check for peeling, cracks, and deformation at the tip of the ATF cooler hose.