Removal and Installation

Transmission Mounting System

REMOVAL

TRANSMISSION REAR CROSSMEMBER & REAR CUSHION RUBBER
1) Disconnect the ground cable from battery.
2) Lift up the vehicle.
3) Remove the under cover.
4) Remove the front exhaust pipe.
5) Remove the heat shield cover.





6) Set the transmission jack under transmission. Make sure that the support plate of transmission jack does not touch the oil pan.
7) Remove the transmission rear crossmember.





8) Remove the rear cushion rubber.

INSTALLATION

TRANSMISSION REAR CROSSMEMBER & REAR CUSHION RUBBER
1) Install the rear cushion rubber.





2) Install the crossmember.





3) Remove the transmission jack.
4) Install the heat shield cover.
5) Install the front exhaust pipe.
6) Install the under cover.
7) Lower the vehicle.
8) Connect the ground cable to battery.