Installation
Rear Lateral LinkINSTALLATION
CAUTION:
^ Be sure to use a new self-locking nut.
^ Always tighten the bushing in the state where the vehicle is at curb weight and the wheels are in full contact with the ground.
1) Install in the reverse order of removal.
Tightening torque:
Rear lateral link
80 Nm (8.2 kgf-m, 59 ft-lb)
Shock absorber
80 Nm (8.2 kgf-m, 59 ft-lb)
Stabilizer link
33 Nm (3.4 kgf-m, 24.3 ft-lb)
2) Inspect the wheel alignment and adjust if necessary.