Coolant Reservoir: Service and Repair

Reservoir Tank

REMOVAL

1) Remove the collector cover.
2) Lift up the vehicle.
3) Remove the under cover.
4) Remove the bolts on the underside of the radiator stay.





5) Lower the vehicle.
6) Remove the air intake duct.
7) Remove the front upper cover.





8) Remove the radiator upper brackets.





9) Remove the radiator stay.

1) Remove the latch.





2) Remove the radiator hose bracket.
3) Remove the clip holding the harness.
4) Remove the bolts on the left side of the radiator stay.





5) Remove the bolts on the right side of the radiator stay.





10) Remove the reservoir tank.





INSTALLATION

1) Install the reservoir tank.





2) Install the radiator stay.

1) Install the latch.





2) Install the radiator hose bracket.
3) Hold the harness to the radiator stay with a clip.
4) Tighten the bolts on the left side of the radiator stay.





5) Tighten the bolts on the right side of the radiator stay.





3) Install the radiator upper brackets.





4) Install the front upper cover.





5) Install the air intake duct.
6) Lift up the vehicle.
7) Tighten the bolts on the lower side of the radiator stay.





8) Install the under cover.
9) Lower the vehicle lift.
10) Install the collector cover.

INSPECTION

Make sure the engine coolant level is between "FULL" and "LOW".