Installation

ATF Cooler Pipe and Hose

INSTALLATION

1) Install the ATF cooler pipe to frame.





2) Attach the bolts securing the ATF cooler pipe, and attach the ATF cooler hose.

NOTE:
Use a new ATF cooler hose.





3) Connect the harness connector to the A/C pressure sensor.
4) Disconnect the ATF cooler hose from the radiator.

NOTE:
Use a new ATF cooler hose.





5) Install the front bumper.
6) Lift up the vehicle.
7) Install the ATF inlet pipes and outlet pipes with new washer.

NOTE:
Use a new bolt for the converter case joint.





8) Connect the ATF cooler hose to the pipe on the transmission side.

NOTE:
^ Install so that the hose is not folded over, excessively bent or twisted.
^ Insert the hose to the specified position.
^ Use a new ATF cooler hose.





9) Connect the ATF cooler hose to the pipe on the radiator side.

NOTE:
^ Install so that the hose is not folded over, excessively bent or twisted.
^ Insert the hose to the specified position.
^ Use a new ATF cooler hose.





10) Install the front exhaust pipe.
11) Install the under cover.
12) Fill ATF.

NOTE:
Make sure there are no ATF leaks in joints between the transmission, radiator, pipes, and hoses.