Installation

Transmission Mounting System

INSTALLATION

PITCHING STOPPER

1) Install the pitching stopper.





2) Install the air intake chamber and intake boot.
3) Connect the ground cable to battery.

TRANSMISSION REAR CROSSMEMBER & REAR CUSHION RUBBER

1) Install the rear cushion rubber to the transmission.

Tightening torque:
40 Nm (4.1 kgf-m, 29.5 ft-lb)

2) Install the crossmember.





3) Remove the transmission jack.
4) Install the heat shield cover.





5) Install the front exhaust pipe, rear exhaust pipe and muffler.
6) Connect the ground cable to battery.