Sunroof / Moonroof Motor: Service and Repair

Sunroof Motor

REMOVAL

CAUTION: Never rotate the motor assembly after removing it.

1. Completely close the glass lid.
2. Disconnect the ground cable from battery.
3. Remove the spot map light.
4. Remove the motor assembly.

CAUTION: When removing the motor assembly, secure the cable wires to prevent moves.







1. Disconnect the sunroof motor connector (A).
2. Remove the screws (B) to remove motor assembly.

INSTALLATION

CAUTION: When installing the motor assembly, be careful not to move the sunroof cable.

1. Install each part in the reverse order of removal.
2. Perform the initialize operation.
3. Check the operation of sunroof with following table below.