Rear Spoiler

Rear Spoiler

Rear Spoiler:

REMOVAL

1. Disconnect the ground cable from battery.
2. Open the trunk lid.
3. Remove the high mount stop light connector (A).
4. Remove the rear spoiler attachment nut (B) and clip (C), and remove the rear spoiler.

CAUTION:
- When removing the nut, be careful not to drop the nut inside the trunk lid panel.
- Be careful not to cause damage during removal and installation.







INSTALLATION

CAUTION: Improper installing may cause the water leakage, make sure the harness grommet is installed securely.

1. Install each part in the reverse order of removal.
2. Clean the trunk lid and spoiler attachment surface before installation.

Tightening torque: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)