Purge Control Solenoid Valve

Purge Control Solenoid Valve

INSPECTION

1. PURGE CONTROL SOLENOID VALVE
1. Check that the purge control solenoid valve has no deformation, cracks or other damages.
2. Measure the resistance between the purge control solenoid valve terminals.






3. Check that air does not come out from (B) when air is blown into (A).






4. Connect the terminal No. 1 to the battery positive terminal and the terminal No. 2 to the battery negative terminal. Check that air is discharged from (B), when supplying air to (A).






2. OTHER INSPECTIONS
Check that the evaporation hose has no cracks, damage or loose part.