Removal and Replacement

Washer Tank and Motor

REMOVAL

1. Open the front hood.
2. Disconnect the ground cable from battery.
3. Remove the front bumper face.
4. Remove the duct clip.






5. Disconnect the connector.






6. Remove the screws and detach the cover.






7. Disconnect the hoses.






8. Remove the bolts and nuts and remove the washer tank.






INSTALLATION

Install each part in the reverse order of removal.

Tightening torque: 6.0 N.m (0.61 kgf.m, 4.4 ft.lb)