Sun Shade: Service and Repair

Sunshade

REMOVAL

1. Remove the lid assembly - sunroof.
1. Completely close the lid assembly - sunroof, and open the sunshade assembly.
2. Remove the TORX(R) bolt, and then remove the lid assembly - sunroof.

CAUTION: Be careful not to damage the lid assembly - sunroof.

PREPARATION TOOL: TORX(R) T25







2. Remove the trim panel - roof assembly.
3. Remove the sunshade assembly.
1. Attach protective tape (a) on the handle of sunshade assembly.
2. Remove the left and right stoppers (b).
3. Remove the sunshade assembly while pulling the center of the brace downward.

CAUTION: Be careful not to damage the sunshade assembly.







INSTALLATION

Install each part in the reverse order of removal.

Tightening torque:
Refer to "COMPONENT" of "General Description". [Ref. to COMPONENT, General Description.]