Front Encoder

Front Magnetic Encoder

REMOVAL

Refer to "Front Hub Unit Bearing" for removal, because the front magnetic encoder is integrated with the hub unit COMPL - front axle.

INSTALLATION

Refer to "Front Hub Unit Bearing" for installation, because the front magnetic encoder is integrated with the hub unit COMPL - front axle.

INSPECTION

Visually check the magnetic encoder for any damage. If necessary, replace with a new hub unit COMPL - front axle.

NOTE:
Because the magnetic encoder is integrated with hub unit COMPL, replace the hub unit COMPL with a new part if there is any defect found on the magnetic encoder.