Marker Lamp Bulb: Service and Repair

Rear Side Marker Light Bulb

REMOVAL

NOTE: It is installed to 5 door model only.

1. Disconnect the ground cable from battery.
2. Remove the light assembly - rear combination.

CAUTION: Be careful not to damage the clips.

1. Release the bolts and clips, then pull out the light assembly - rear combination to the vehicle rear.
2. Disconnect the connector and remove the light assembly - rear combination.






3. Remove the bulb socket and rear side marker light bulb.






INSTALLATION

Install each part in the reverse order of removal.

Tightening torque: Light assembly - rear combination: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)