Installation

INSTALLATION

CAUTION:
^ Be sure to use a new self-locking nut.
^ Always tighten the bushing in the state where the vehicle is at curb weight and the wheels are in full contact with the ground.

1) Install each part in the reverse order of removal.

Tightening torque:
Trailing link - rear sub frame assembly: 90 Nm (9.18 kgf-m, 66.4 ft-lb)
Trailing link - housing assembly - rear axle: 90 Nm (9.18 kgf-m, 66.4 ft-lb)

2) Install the rear wheels.

Tightening torque:
120 Nm (12.24 kgf-m, 88.5 ft-lb)