Front Wiper Arm

Front Wiper Arm

REMOVAL

1. Open the hood COMPL - front.
2. Remove the arm assembly - windshield wiper.
1. Remove the cover - windshield wiper arm.
2. Remove the nuts, and remove the arm assembly - windshield wiper.






INSTALLATION

1. Install the arm assembly - windshield wiper.
1. Assemble the arm assembly - windshield wiper so that the blade assembly - windshield wiper is aligned to the ceramic print point mark of the windshield glass.






2. Tighten the arm assembly - windshield wiper to specified torque and install the cap.

Tightening torque: 22 N.m (2.24 kgf-m, 16.2 ft-lb)






2. Check the position of windshield wiper.