Removal

Oil Pump

REMOVAL

1) Disconnect the ground cable from battery.
2) Remove the V-belts.
3) Remove the power steering oil pump assembly.
(1) Disconnect the connector from power steering pump switch.
(2) Disconnect the pressure hose (b) and suction hose (a) from power steering oil pump.

CAUTION:
^ Do not allow fluid to come into contact with the pulley belt.
^ Plug the ends of the hose and pipe to prevent foreign matter from entering.





(3) Remove the bolts, and remove the power steering oil pump assembly.





4) Secure the oil pump bracket in a vise, and remove the bolts from both front and rear sides of the oil pump.

CAUTION:
When securing the oil pump bracket in a vice, hold the oil pump bracket with the least possible force between two pieces of wood.





5) Remove the power steering oil pump assembly from the bracket.