Windshield Washer Spray Nozzle: Adjustments

Front Washer Nozzle

ADJUSTMENT
1. Turn the wiper switch to OFF position.
2. While the vehicle is at a standstill, insert the washer nozzle adjustment tool (a) into upper side (b) and lower side (c) of the washer nozzle to perform necessary adjustment.






CAUTION: Washer nozzle is made of resin. If precision screwdriver (A) or equivalent is inserted into discharge port for adjustment, the discharge port can be deformed, and washer fluid cannot be sprayed.






3. Adjust the injection position of the washer fluid as shown in the figure.