Hood Latch: Service and Repair
Front Hood Lock AssemblyREMOVAL
1. Open the front hood.
2. Remove the engine front cover.
3. Remove the bolts, and then detach the front hood lock assembly.
4. Remove the cable from lock assembly.
INSTALLATION
Install in the reverse order of removal.
Tightening torque:
T1: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)
T2: 25 N.m (2.55 kgf-m, 18.4 ft-lb)
T3: 33.0 N.m (3.36 kgf-m, 24.3 ft-lb)
NOTE: Apply grease to the movable part.